Hi everyone. Travelling and work related stuff have kept me from posting for a bit, but I’ve had some time recently to work out in the shop.
This is a continuation of the render-cow project I posted last time. I’ve started working on the case mod. This first post is me constructing the fan bank for what will become the bottom of the case. Got a scrap piece of wood, cut it down to the right length, then cut some holes in it for the fan vents. This board will be screwed to the bottom of the case and provide the air intake.
Next step will be to drill out the bolt holes that will connect this board (and the case) with the top and bottom pieces. It’ll make more sense when you see the pictures.